OUR EXPERIENCE OPTIMIZATION TOOLS USED IN THE REMOVAL OF IMPACTED LOWER THIRD MOLARS

  • D. C. Avetikov HSEE of Ukraine ”Ukrainian Medical Stomatological Academy”, Poltava
  • V. D. Akhmerov HSEE of Ukraine ”Ukrainian Medical Stomatological Academy”, Poltava
  • S. A. Stavitskiy HSEE of Ukraine ”Ukrainian Medical Stomatological Academy”, Poltava
  • I. V. Yatsenko HSEE of Ukraine ”Ukrainian Medical Stomatological Academy”, Poltava
Keywords: retention of the lower third molars, outpatient surgery in the oral cavity, surgical dental instruments.

Abstract

The article is devoted to the problem of surgical treatment of retention of teeth.

The removal of impacted and partially impacted lower third molars is difficult, and sometimes it’s very challenging task even for an experienced surgeon dentist. Anatomical features of retromolar of the lower jaw and the distal position of the third molar teeth in the dentition with small surgical field, the presence in the oral cavity at the time of intervention tools the surgeon and the assistant to create a very difficult environment for manipulation.

The correct choice of methods of operation and special tools greatly facilitate the work of the surgeon, reduce the duration of the intervention, the volume of operative trauma, and therefore the risk of postoperative complications, which upon removal of impacted third molars occur relatively frequently.

Many years of practical experience suggest that the traditional set of dental surgical instruments used in such cases, do not always meet the emerging technical challenges.

For example, while surgical access different hooks are usually used. Due to the thickness of their working parts they cannot be injected under the flap to ensure a secure fit. In the end – flap constantly slips out from under the hook of an assistant. When working in such cases with a drill, there is a threat of a winding-edge flap on rotating boron, which often happens during careless movements in conditions of poor review.

This article describes improvements of surgical instruments used in such procedures.

Downloads

Download data is not yet available.

References

1. Ахмеров В. Д. Профілактика запальних ускладнень при атиповому видаленні нижнього третього моляра / В. Д. Ахмеров //Український стоматологічний альманах. – 2011. - №5. - С.78.

2. Патент на корисну модель № 66122. Україна МКИ А61С1/00. Спосіб профілактики післяопераційних запальних ускладнень при атиповому видаленні нижнього третього моляра /Україна МКИ А61С1/00. В.Д. Ахмеров; О.В. Рибалов; Українська медична стоматологічна академія (UA). - №666122; заявл.30.05.11; опубл. 26.12.11, Бюл. №24.2011.

3. Тимофеев А.А. Руководство по челюстнолицевой хирургии и хирургической стоматологии / А.А. Тимофеев. – К.: ООО «Червона Рута. - Турс», 2002. - 1024 с.
Published
2018-03-21
How to Cite
Avetikov, D. C., Akhmerov, V. D., Stavitskiy, S. A., & Yatsenko, I. V. (2018). OUR EXPERIENCE OPTIMIZATION TOOLS USED IN THE REMOVAL OF IMPACTED LOWER THIRD MOLARS. Ukrainian Dental Almanac, (4), 40-42. Retrieved from https://dental-almanac.org/index.php/journal/article/view/57
Section
SURGICAL DENTISTRY